Powder Method
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Completely clean the entire engine and surrounding components.
- Apply an aerosol-type powder, baby powder, foot powder, etc., to the suspected area.
- Operate the vehicle for several miles at normal operation temperature and at varying speeds.
- Identify the type of fluid, and the approximate location of the leak, from the discolorations in the powder surface.
- Visually inspect the suspected area. Use a small mirror to assist in looking at hard to see areas.
Refer to Possible Causes for Leaks if necessary.