LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Engine Mechanical (Repair Instructions 1 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 1) >> Engine Mount Strut Bracket Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left engine mount strut from the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left .
  2. Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.
    3. Fig 1: Identifying Exhaust Crossover Pipe Nuts & Studs
    GM1395470Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust crossover pipe nuts (5) and studs (1).
    4. Fig 2: View Of Engine Mount Strut Bracket Bolts
    GM1457530Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine mount strut bracket bolts from the cylinder head.
  5. Remove the left engine mount strut bracket and bolts from the vehicle.
scientia non olet · About LEMON Manuals