DTC Parameters

DTC sets if APP sensor 2 are does not change by more than 40 mV from when APP sensor 1 transitioned from under 1.27 volts to over 1.27 volts when stored APP sensor 1 reading below 1.27 volts was present for longer than 100 ms and the stored APP sensor 1 reading above 1.27 volts was present for longer than 100 ms, main relay voltage is greater than 7.0 volts, and ignition is on; or DTC sets if the difference between APP sensor 1 and APP sensor 2 are greater than 0.21 volts for low throttle, greater that 0.27 volts for part throttle or greater than 1.05 volts for full throttle for longer than 160 ms when neither APP sensor value has been substituted.