Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

Fig 1: Identifying Rear Fascia Retainers

Courtesy of GENERAL MOTORS CORP.

Remove the rear fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) or Fascia Replacement - Rear Bumper (Rendezvous) in Bumpers.

Fig 2: Locating Rear Energy Absorber

Courtesy of GENERAL MOTORS CORP.

Remove the rear energy absorber. Refer to Energy Absorber Replacement - Rear (Aztek) or Energy Absorber Replacement - Rear (Rendezvous) in Bumpers.

Fig 3: View Of Rear Impact Bar

Courtesy of GENERAL MOTORS CORP.

Remove the rear impact bar. Refer to Impact Bar Replacement - Rear Bumper in Bumpers.

Fig 4: Identifying Trailer Hitch Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the trailer hitch assembly.