Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wiper Blade Release Clip

Courtesy of GENERAL MOTORS CORP.

Turn the ignition switch to the ACCY position.
Turn the wiper switch to the DELAY position.
Turn the ignition OFF when the wipers are in the innerwipe position and not moving.
Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.

Fig 2: Removing & Installing Wiper Blade At Wiper Arm Hook

Courtesy of GENERAL MOTORS CORP.

Bring the wiper arm out through the opening in the wiper blade.