LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1116 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Wiper Blade At Wiper Arm Hook
    GM497492Courtesy of GENERAL MOTORS CORP.
  1. Insert the hook of the rear wiper arm through the opening in the rear wiper blade.
  2. Fig 2: View Of Wiper Blade Clip
    GM497481Courtesy of GENERAL MOTORS CORP.
  3. Position the rear wiper blade pivot in the inside radius of the rear wiper arm hook.
  4. Press the rear wiper blade pivot into the rear wiper arm hook until the pivot locks into the hook.