LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1116 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement - Windshield Washer >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Hose
    GM755860Courtesy of GENERAL MOTORS CORP.
  1. Position the washer hose to the vehicle.
  2. Install the washer hose to the washer pump.
  3. Connect the washer hose to the washer solvent container neck.
  4. Install the washer hose grommet to the slot in the grille panel.
  5. Connect the washer hose to the air inlet grille panel.
  6. Connect the washer hose to the wiper arms.
  7. Close the hood.
scientia non olet · About LEMON Manuals