Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the radiator outlet hose.
- Connect the radiator outlet hose to the radiator.
- Reposition the hose clamp at the radiator to secure the hose using the J 38185 . See Special Tools and Equipment .
- Connect the radiator outlet hose to the water pump housing.
- Reposition the hose clamp at the water pump housing to secure the hose using the J 38185 . See Special Tools and Equipment .
- Fill the cooling system. Refer to Draining and Filling Cooling System .