LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1115 (Engine Cooling System) >> Repair Instructions >> Coolant Recovery Reservoir Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reposition the reservoir hose clamp at the radiator overflow fitting using the J 38185  . See Special Tools and Equipment .
  2. Remove the reservoir hose at the radiator overflow fitting.
    3. Fig 1: View Of Coolant Reservoir
    GM125802Courtesy of GENERAL MOTORS CORP.
  3. Remove the reservoir mounting clip.
  4. Remove the coolant reservoir.
scientia non olet · About LEMON Manuals