LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1115 (Engine Cooling System) >> Diagnostic Information and Procedures >> Thermostat Diagnosis >> Thermostat Test Procedure Using Tempil Sticks

Thermostat Test Procedure Using Tempil Sticks

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

The coolant thermostat can be tested using a temperature (tempil) stick. The temperature stick is a pencil like device. It has a wax material containing certain chemicals which melt at a given temperature. Temperature sticks can be used to determine a thermostat's operating range, by rubbing 87°C (188°F) and 97°C (206°F) sticks on the thermostat housing.

  1. Use a tempil stick in order to find the opening and the closing temperatures of the coolant thermostat.
    • J 24731-188 tempil stick melts at 87°C (188°F). The thermostat should begin to open.
    • J 24731-206 tempil stick melts at 97°C (206°F). The thermostat should be fully open.
  2. Replace the coolant thermostat if it does not operate properly between this temperature range.