LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1113 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Mark the hood latch to the hood latch support bracket with a grease pencil.
    Fig 1: View Of Hood Latch
    GM624224Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts from the hood latch.
    Fig 2: Identifying Hood Latch Retaining Nuts
    GM624221Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not crimp the hood latch release cable.
  4. Disconnect the hood latch release cable from the hood latch by squeezing the hood release cable retainer.
    Fig 3: Locating Hood Latch Release Cable
    GM624220Courtesy of GENERAL MOTORS CORP.
  5. Remove the hood latch from the hood latch support bracket.
scientia non olet · About LEMON Manuals