Diagnostic Procedures
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Start engine and allow ECT to reach at least 176°F (80°C). Using scan tool, perform the following procedure using ENGINE SPEED CONTROL special function while monitoring ENGINE SPEED. Command 1600 RPM and hold for 5 seconds. Command 1000 RPM and hold for 5 seconds. Command 600 RPM and hold for 5 seconds. If ENGINE SPEED matches COMMANDED RPM within 100 RPM, problem is intermittent. See DIAGNOSTIC AIDS . If ENGINE SPEED does not match COMMANDED RPM within 100 RPM, go to next step.
- Check the following for possible causes:
- System voltage out of range.
- Carbon around throttle plate/bore.
- Mechanical engine load.