LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Bumper System) >> Repair Instructions >> Fascia Support Replacement - Front Bumper Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fascia. Refer to Fascia Replacement - Front Bumper - Upper (Aztek)  or Fascia Replacement - Front Bumper - Upper (Rendezvous)  .
  2. Remove the hood latch and cable. Refer to Hood Latch Release Cable Replacement .
  3. Disconnect the headlamp wiring harness from the fascia upper support.
    Fig 1: View Of Headlamp Wiring Harness
    GM621383Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the fascia upper support.
  5. Remove the fascia upper support from the upper radiator support.
    Fig 2: Identifying Fascia Upper Support
    GM621384Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals