LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Bumper System) >> Repair Instructions >> Fascia Grille Replacement (Aztek) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the grille retaining tabs to the slots in the front fascia.
  2. Install the grille by pressing into place until the retaining tabs (1, 2, 3, 4, 5) are fully seated.
    Fig 1: View Of Fascia Grille Retaining Tabs (Aztek)
    GM709480Courtesy of GENERAL MOTORS CORP.
  3. Install the headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) or Headlamp Assembly or Headlamp Bulb Replacement (Rendezvous) in Lighting Systems.
scientia non olet · About LEMON Manuals