LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek)  or Fascia Replacement - Rear Bumper (Rendezvous)  .
    Fig 1: Identifying Rear Bumper Fascia Push-In Retainers To The Rear Impact Bar (Rendezvous)
    GM754680Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear bumper energy absorber from the rear fascia.
scientia non olet · About LEMON Manuals