LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper energy absorber to the rear fascia.
    Fig 1: Identifying Rear Bumper Fascia Push-In Retainers To The Rear Impact Bar (Rendezvous)
    GM754680Courtesy of GENERAL MOTORS CORP.
  2. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek)  or Fascia Replacement - Rear Bumper (Rendezvous)  .
scientia non olet · About LEMON Manuals