Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Install the rear bumper energy absorber to the rear bumper impact bar.

Fig 1: Identifying Rear Bumper Energy Absorber (Aztek)
Courtesy of GENERAL MOTORS CORP.
Install the push-in retainers to the rear bumper energy absorber.

Fig 2: View Of Rear Bumper Energy Absorber Push-In Retainers (Aztek)
Courtesy of GENERAL MOTORS CORP.
Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) or Fascia Replacement - Rear Bumper (Rendezvous) .