LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (Accessory Power Socket) >> Repair Instructions >> Cigar Lighter Housing Replacement - Instrument Panel (I/P) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cigar lighter fuse.
  2. Place one side of the T-portion of J 42059  into the tab window. Angle the other portion into the opposite tab window. Pull the cigar lighter housing straight out.
    Fig 1: Inserting J 42059 Into Cigar Lighter Housing
    GM648326Courtesy of GENERAL MOTORS CORP.
  3. Remove J 42059  from the cigar lighter housing.
  4. Disconnect the electrical connector from the housing.
    Fig 2: Identifying Cigar Lighter Housing Electrical Connector
    GM648335Courtesy of GENERAL MOTORS CORP.
  5. Remove the housing retainer by using your index finger and pulling out.
    Fig 3: Locating Housing Retainer Using Index Finger
    GM648332Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals