LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (Accessory Power Socket) >> Repair Instructions >> Cigar Lighter Housing Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the cigar lighter housing retainer, placing the key to the slot into the cigar lighter housing hole.
    Fig 1: Inserting J 42059 Into Cigar Lighter Housing Hole
    GM648326Courtesy of GENERAL MOTORS CORP.
  2. Install the housing retainer by pressing into place until fully seated.
    Fig 2: Locating Housing Retainer Using Index Finger
    GM648332Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the housing.
    Fig 3: Identifying Cigar Lighter Housing Electrical Connector
    GM648335Courtesy of GENERAL MOTORS CORP.
  4. Position the housing to the retainer.
  5. Install the housing into the front console. Press into place until fully seated.
  6. Install the cigar lighter fuse.
  7. Inspect the cigar lighter for proper operation.
scientia non olet · About LEMON Manuals