LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Trim Panel Replacement - Rear Seat Back >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Seat Back Trim Panel
    GM627383Courtesy of GENERAL MOTORS CORP.
  1. Place the seat back trim panel to the rear seat back.
  2. Fig 2: View Of Rear Seat Back Trim Panel Push-Pin Retainer
    GM627414Courtesy of GENERAL MOTORS CORP.
  3. Install the outer portion of the push-pin retainer to the seat back trim panel.
  4. Fig 3: Installing Push-Pin Retainer
    GM627415Courtesy of GENERAL MOTORS CORP.
  5. Install the push-pin retainer pressing into place until fully seated.