LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Replacement - Rear Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the rear bucket seat back fully forward.
    2. Fig 1: Identifying Rear Bucket Seat Components
    GM756348Courtesy of GENERAL MOTORS CORP.
  2. Pull the release strap on the back side of the rear seat adjuster or pull the release handle on the side of the rear seat in order to release the adjuster from the floor.
  3. Lift the rear of the seat fully upwards and forward.
  4. Lift the rear seat from the anchor plate.
  5. Remove the rear sear from the vehicle.
scientia non olet · About LEMON Manuals