LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 .
  2. Position the front bucket seat to the mid-position with the back in the full up position.
    Fig 1: Identifying Front Seat Adjuster Nuts
    GM630841Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts from the front seat adjuster at the floor pan.
  4. Disconnect the electrical connectors from the seat.
  5. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals