LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Replacement - Rear (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Seat Cushion
    GM629177Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear split bench seat from the vehicle. Refer to Seat Replacement - Rear 50-50 Split .
  2. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
  3. Remove the rear seat cushion cover from the rear seat cushion. Refer to Seat Cushion Cover Replacement - Rear (Bucket)  or Seat Cushion Cover Replacement - Rear (Split Bench) .
  4. Remove the rear seat cushion from the rear seat frame.
scientia non olet · About LEMON Manuals