LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Replacement - Rear (Bucket) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Cushion
    GM627451Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat cushion to the rear seat frame.
  2. Install the rear seat cushion cover to the rear seat cushion. Refer to Seat Cushion Cover Replacement - Rear (Bucket)  or Seat Cushion Cover Replacement - Rear (Split Bench) .
  3. Install the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
  4. Install the rear bucket seat to the vehicle. Refer to Seat Replacement - Rear Bucket .
scientia non olet · About LEMON Manuals