LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Outer Trim Panel Replacement - Rear Seat (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Rear Seat Cushion Trim Panel Screw
    GM629072Courtesy of GENERAL MOTORS CORP.
  1. Remove the screw from the rear seat cushion trim panel.
    2. Fig 2: View Of Rear Seat Cushion Trim Panel Components
    GM629075Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear seat cushion trim panel by lifting up to release the retainer from the recliner hinge.
scientia non olet · About LEMON Manuals