LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Inner Trim Panel Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bucket seat. Refer to Seat Replacement - Bucket .
    2. Fig 1: View Of Front Seat Cushion Trim Panel Rear Screw
    GM626929Courtesy of GENERAL MOTORS CORP.
  2. Remove the screw from the rear of the front seat cushion trim panel.
    3. Fig 2: Identifying Front Seat Cushion Trim Panel Front Screw
    GM626888Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw from the front of the front seat cushion trim panel.
    4. Fig 3: Locating Front Seat Cushion Trim Panel Center Screw
    GM631294Courtesy of GENERAL MOTORS CORP.
  4. Remove the screw from the center of the front seat cushion trim panel.
    5. Fig 4: View Of Front Seat Cushion Trim Panel
    GM631091Courtesy of GENERAL MOTORS CORP.
  5. Remove the front seat cushion trim panel from the front bucket seat.
scientia non olet · About LEMON Manuals