LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Inner Panel Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bucket seat from the vehicle. Refer to Seat Replacement - Rear Bucket .
    2. Fig 1: Locating Rear Seat Cushion Trim Cover Rear Screw
    GM627485Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear screw from the rear seat cushion trim cover.
    3. Fig 2: Identifying Rear Seat Cushion Trim Cover Front Screw
    GM627487Courtesy of GENERAL MOTORS CORP.
  3. Remove the front screw from the rear seat cushion trim cover.
  4. Remove the rear seat belt buckle. Refer to Seat Belt Buckle Replacement - Rear (Bucket) or Seat Belt Buckle Replacement - Rear (Split Bench) .
    5. Fig 3: View Of Rear Seat Cushion Trim Cover
    GM627489Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear seat cushion trim cover from the rear seat.
scientia non olet · About LEMON Manuals