LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Underside Of Front Bucket Seat
    GM627162Courtesy of GENERAL MOTORS CORP.
  1. Remove the front bucket seat from the vehicle. Refer to Seat Replacement - Bucket .
  2. Remove the front seat adjuster. Refer to Seat Adjuster Replacement - Front .
  3. Remove the front seat back from the front seat. Refer to Seat Back Replacement - Front .
    4. IMPORTANT: Remove the front seat cushion cover and the cushion as one piece.
  4. Remove the front seat cushion cover from the front seat cushion. Refer to Seat Cushion Cover Replacement - Front (Aztek) .
  5. Remove the front seat cushion from the front seat frame. Refer to Seat Cushion Replacement - Front (Aztek) .
  6. Disconnect all required wiring harnesses from the front seat cushion frame.
scientia non olet · About LEMON Manuals