LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Back Pad Replacement - Rear (Split Bench) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Seat Back Cushion Cover & Pad
    GM629149Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back pad to the rear seat back frame.
    2. Fig 2: Pulling Rear Seat Back Cover Up & Over Pad
    GM629141Courtesy of GENERAL MOTORS CORP.
  2. Install the hog rings to the rear seat back pad.
  3. Install the rear seat back cover. Refer to Seat Back Cover Replacement - Rear (Bucket)  or Seat Back Cover Replacement - Rear (Split Bench) .
scientia non olet · About LEMON Manuals