LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Seat Back Cushion Cover & Pad
    GM629149Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear split bench seat. Refer to Seat Replacement - Rear 50-50 Split .
  2. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
    3. IMPORTANT: Remove the rear seat back cushion cover and pad as one piece, if replacing the front seat back frame only.
  3. Remove the rear seat back cushion cover. Refer to Seat Back Cover Replacement - Rear (Bucket)  or Seat Back Cover Replacement - Rear (Split Bench) .
  4. Remove the rear seat back pad from the rear seat back frame. Refer to Seat Back Pad Replacement - Rear (Bucket)  or Seat Back Pad Replacement - Rear (Split Bench) .
scientia non olet · About LEMON Manuals