LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Bucket) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Back Frame
    GM627476Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back pad to the rear seat back frame. Refer to Seat Back Pad Replacement - Rear (Bucket)  or Seat Back Pad Replacement - Rear (Split Bench) .
  2. Install the rear seat back cushion cover. Refer to Seat Back Cover Replacement - Rear (Bucket)  or Seat Back Cover Replacement - Rear (Split Bench) .
  3. Install the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
  4. Install the rear seat. Refer to Seat Replacement - Rear Bucket .
scientia non olet · About LEMON Manuals