LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Front Seat Track Covers Screws
    GM626934Courtesy of GENERAL MOTORS CORP.
  1. Install the track covers to the front seat.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the front seat track covers.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Install the front bucket seat. Refer to Seat Replacement - Bucket .