LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Adjuster Replacement - Rear (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear split bench seat. Refer to Seat Replacement - Rear 50-50 Split .
  2. Remove the rear split bench seat release handle and bezel.
    3. Fig 1: Identifying Rear Seat Adjuster Bolts
    GM629154Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the rear seat adjuster.
    4. Fig 2: View Of Rear Seat Adjuster
    GM629155Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear seat adjuster from the rear seat cushion frame.
scientia non olet · About LEMON Manuals