LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Seat Adjuster Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bucket seat. Refer to Seat Replacement - Bucket .
  2. Remove the inner cushion trim cover. Refer to Seat Cushion Inner Trim Panel Replacement - Front .
  3. Remove the outer cushion trim cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
  4. Remove the front seat belt buckle. Refer to the following procedures in Seat Belts:
    5. Fig 1: Identifying Front Seat Adjuster Motors Electrical Connectors
    GM627112Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connectors from the front seat adjuster motors.
    6. Fig 2: View Of Seat Adjuster Bolts
    GM627105Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts from the seat adjuster.
    7. Fig 3: Locating Seat Cushion Frame Adjuster
    GM627096Courtesy of GENERAL MOTORS CORP.
  7. Remove the adjuster from the seat cushion frame.
  8. Remove the handle from the seat adjuster.
scientia non olet · About LEMON Manuals