LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1106 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Rear Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Head Restraint Post Components
    GM317093Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint posts (1) into the guides.
  2. Push the head restraint to a full down position.
  3. Raise the head restraint in order to ensure that the restraint stops at the detent (3).
  4. Return the head restraint to its original position.
scientia non olet · About LEMON Manuals