LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1104 (HVAC Systems - Automatic) >> Repair Instructions >> Aspirator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Aspirator Hose Mounting Screw
    GM885915Courtesy of GENERAL MOTORS CORP.
  1. Remove the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
  2. Remove the aspirator hose mounting screw.
  3. Disconnect the aspirator hose from the aspirator duct adapter (1).
  4. Remove the aspirator hose from the HVAC module.
scientia non olet · About LEMON Manuals