LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Body Rear End) >> Repair Instructions >> Latch Striker Replacement - Liftgate (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the lower liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (Aztek)  or Trim Panel Replacement - Liftgate (Rendezvous) .
  3. Remove the bolts from the liftgate strikers.
    Fig 1: Identifying Liftgate Striker Mounting Bolts (Aztek)
    GM621895Courtesy of GENERAL MOTORS CORP.
    4. Fig 2: Liftgate Striker View (Aztek)
    GM621896Courtesy of GENERAL MOTORS CORP.
  4. Remove the liftgate strikers from the liftgate.
scientia non olet · About LEMON Manuals