LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Column Anchor Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.
    2. Fig 1: Identifying Steering Column Upper Nut
    GM545583Courtesy of GENERAL MOTORS CORP.
  2. Remove the steering column upper nut.
  3. Remove the center console. Refer to Console Replacement - Front Floor (Aztek) or Console Replacement - Front Floor (Rendezvous) in Instrument Panel, Gages and Console.
    4. Fig 2: View Of Anchor Cable Nut On Center Console Bracket
    GM545578Courtesy of GENERAL MOTORS CORP.
  4. Remove the anchor cable nut from the center console bracket.
  5. Remove the anchor cable.
scientia non olet · About LEMON Manuals