LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1092 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0567: Cruise Control Resume Switch Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

The cruise control set/coast switch is an input to the ECM. The ECM uses the cruise control set/coast switch signal circuit in order to detect when the driver has requested to set the vehicle speed or to decelerate the vehicle speed. The ECM detects a voltage signal on the cruise control set/coast switch signal circuit when the switch is applied.

scientia non olet · About LEMON Manuals