LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Multifunction Switch Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Floor Console
    GM791874Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor console. Refer to Trim Plate Replacement - Front Floor Console (Aztek)  or Trim Plate Replacement - Front Floor Console (Rendezvous) .
  2. Remove the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Aztek) .
    3. Fig 2: Instrument Panel (I/P) Multifunction Switch Assembly
    GM791878Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the switch assembly.
    4. Fig 3: Instrument Panel (I/P) Multifunction Switch Assembly Electrical Connectors
    GM791879Courtesy of GENERAL MOTORS CORP.
  4. Remove the electrical connectors from the switch assembly.
  5. Remove the switch assembly.
scientia non olet · About LEMON Manuals