LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Compartment Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Instrument Panel Compartment Hinge Bolts
    GM631061Courtesy of GENERAL MOTORS CORP.
  1. Open the instrument panel (I/P) compartment.
  2. Remove the screws from the I/P compartment hinge.
  3. Remove the I/P compartment door from the I/P.
  4. Remove the lower I/P compartment trim panel.
    5. CAUTION: Wear safety glasses in order to avoid eye damage.
  5. Drill out the rivets holding the I/P compartment hinge to the I/P panel.
  6. Remove the I/P compartment hinge.
scientia non olet · About LEMON Manuals