Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Panel Compartment Hinge Bolts

Courtesy of GENERAL MOTORS CORP.

Fasten the hinge to the lower compartment trim panel with new rivets.
Install the lower I/P compartment trim panel.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Align the I/P compartment door with the hinge assembly and secure with the I/P compartment screws.
Tighten: Tighten the screws to 4 N.m (3 lb in)
Verify the alignment of the I/P compartment door.
Close the I/P compartment door.