Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating I/P Compartment Door Latch Screws

Courtesy of GENERAL MOTORS CORP.

Install the door handle into position in the I/P compartment door.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the I/P compartment door latch retaining screws.
Tighten: Tighten the IP compartment door latch retaining screws to 2 N.m (18 lb in).
Close the I/P compartment door assembly.