LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Driver Information Center Switch Replacement (Rendezvous) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Cluster Trim Plate
    GM784927Courtesy of GENERAL MOTORS CORP.
  1. Use a flat-bladed tool to pry the cover of the driver information center panel from the instrument panel.
    2. Fig 2: Head Up Display Switch Electrical Connectors
    GM784930Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors from the driver information center panel.
  3. Remove the driver information center panel from the instrument panel.
scientia non olet · About LEMON Manuals