LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Driver Information Center Switch Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Head Up Display Switch Electrical Connectors
    GM784930Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the driver information center panel.
    2. Fig 2: Locating Cluster Trim Plate
    GM784927Courtesy of GENERAL MOTORS CORP.
  2. Install the driver information center panel to the instrument panel. Press firmly into place until fully seated.
scientia non olet · About LEMON Manuals