LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Console Replacement - Front Floor (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek)  or Trim Plate Replacement - Front Floor Console (Rendezvous) .
  2. Disconnect the electrical connectors.
    3. Fig 1: Locating Front Floor Console Nuts
    GM642415Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts from the front of the front floor console.
    4. Fig 2: View Of Front Floor Console Nuts -Rear
    GM642417Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts from the back of the front floor console.
  5. Recline the seats to gain clearance.
    6. Fig 3: Aligning Front Floor Console
    GM642418Courtesy of GENERAL MOTORS CORP.
  6. Lift straight up on the front floor console and pull back in order to remove the console from the vehicle.
scientia non olet · About LEMON Manuals