LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Push-In Retainers From IP Insulator To Instrument Panel
    GM318200Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainers from the IP insulator to instrument panel.
  2. Remove the press-on retainers from the IP insulator to dash mat.
  3. Fig 2: Identifying IP Courtesy Lamp
    GM318203Courtesy of GENERAL MOTORS CORP.
  4. Unsnap the IP courtesy lamp from the IP insulator.
  5. Fig 3: Locating Push-In Retainers From IP Insulator To Instrument Panel
    GM318200Courtesy of GENERAL MOTORS CORP.
  6. Remove the IP insulator from the instrument panel.