LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Press-On Retainers From IP Insulator To Dash Mat
    GM318205Courtesy of GENERAL MOTORS CORP.
  1. Snap the IP courtesy lamp into the IP insulator.
    2. Fig 2: Identifying Push-In Retainers From IP Insulator To Instrument Panel
    GM318202Courtesy of GENERAL MOTORS CORP.
  2. Position the IP insulator to the instrument panel.
  3. Install the push-in retainers to the IP insulator to instrument panel.
  4. Install the press-on retainers to the IP insulator to dash mat.
scientia non olet · About LEMON Manuals