LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bracket Replacement - Console Floor >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console. Refer to Console Replacement - Front Floor (Aztek)  or Console Replacement - Front Floor (Rendezvous) .
  2. Disconnect the console electrical center from the floor-console bracket and move aside, out of the way.
    3. Fig 1: Locating Instrument Panel (I/P) Upper Bolts
    GM618054Courtesy of GENERAL MOTORS CORP.
  3. Remove the upper bolts (2) from the instrument panel (I/P).
  4. Remove the lower nuts (1) from the floor.
  5. Remove the front floor console bracket from the floor.
scientia non olet · About LEMON Manuals