LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1091 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ambient Air Temperature Sensor Electrical Connector
    GM753331Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the right headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) or Headlamp Assembly or Headlamp Bulb Replacement (Rendezvous) in Lighting Systems.
  3. Disconnect the electrical connector from the ambient air temperature sensor.
  4. Use J 38778  in order to remove the push-in retainer which secures the ambient air temperature sensor to the radiator core support. See Special Tools and Equipment .
  5. Remove the ambient air temperature sensor from the vehicle.
scientia non olet · About LEMON Manuals